How To Make A DIY Recliner Riser Platform?

A recliner riser platform can greatly enhance the comfort and accessibility of your recliner chair, especially if you find it difficult to get in and out of a low-seated position.

Knowing how to make a DIY recliner riser platform can be a satisfying project that offers you more control over your comfort and is cost-effective.

This article, written by experts in DIY home projects, walks you through each step of the process, ensuring your success in this endeavor.

How To Make A DIY Recliner Riser Platform? – Short Answer

To make a DIY recliner riser platform, you’ll need 2×4 lumber for the frame, plywood for the top, screws, a power drill, a saw, sandpaper, and non-slip pads or rubber feet. Measure the base of your recliner, cut the lumber and plywood accordingly, assemble the frame, attach the plywood, sand and paint if desired, add non-slip pads or rubber feet, and position your recliner on the platform. Ensure stability, test for support, and make adjustments as needed. Always prioritize safety and take your time during the construction process.

how to make a diy recliner riser platform

Materials Needed

To start, gather the following items:

  • Four pieces of 2×4 lumber for the frame
  • Plywood for the top
  • Screws (2-1/2 inch)
  • Power drill
  • Saw
  • Sandpaper
  • Paint or stain (optional)
  • Non-slip pads or rubber feet

7 Steps to Make A DIY Recliner Riser Platform

The following steps will help you to make the recliner rise platform easily.

How to Build a Riser Platform for a Recliner Chair: Step-by-step guide with measurements, cutting, assembly, and finishing instructions.

1. Determine the Size of Your Riser

Measure the base of your recliner chair to determine the size of the riser platform. The platform should be slightly larger than the chair’s base for stability purposes.

2. Cut the Lumber

Based on your measurements, cut your 2×4 lumber and plywood. You’ll need four pieces of 2×4 for the frame (two for the length, two for the width) and one piece of plywood for the top.

3. Assemble the Frame

Next, lay the 2×4 pieces on their sides to form a rectangular frame. The shorter pieces should be inside the longer ones. Secure each corner with two 2-1/2 inch screws using your power drill.

4. Attach the Plywood

Place the cut plywood on top of the assembled frame. Make sure it lines up properly with the edges of the frame. Attach the plywood to the frame using screws, spacing them about every 6-8 inches apart, ensuring each corner and the middle sections are firmly secured.

5. Sand and Paint

Once the platform is assembled, use sandpaper to smooth any rough edges. This is crucial for safety and the longevity of your recliner. If you want to match the riser with your home decor, you can paint or stain it. Allow it to dry completely before proceeding.

6. Add Non-slip Pads or Rubber Feet

To prevent the riser from sliding on your floor, attach non-slip pads or rubber feet to the bottom of the platform. This step not only ensures stability but also protects your flooring from scratches.

7. Position Your Recliner

Finally, place your recliner on the riser platform. Test it by sitting and rising to ensure it provides the necessary support and stability. Make any necessary adjustments to secure your comfort and safety.

Video Guide: Easy Way To Make Your Own DIY Recliner Riser Platform

Video Credits: JAR Made

Tips for a Successful DIY Project

After completing your DIY recliner riser platform, you might be looking for ways to further improve your project or expand your DIY skills. Here are some expert tips to ensure your DIY efforts are successful and rewarding.

Understand the Importance of Quality Materials

While it might be tempting to save money by opting for cheaper materials, investing in quality materials can significantly enhance the longevity and safety of your DIY projects. For instance, choosing high-quality lumber and screws for your recliner riser platform can ensure its sturdiness and durability.

Keep Your Workspace Organized

A cluttered workspace can hinder your efficiency and pose safety risks. Keep your workspace clean and organized, ensuring all your tools and materials are easy to find when you need them. This will also help in preventing any potential accidents or misplacements.

Practice Safety Measures

When undertaking any DIY project, safety should always be your top priority. Always wear appropriate protective gear such as safety glasses, gloves, and durable footwear. When using power tools, make sure you understand their operation and safety features. Never leave them running unattended and keep them out of reach from children.

Seek Expert Advice When Needed

Don’t hesitate to seek expert advice if you’re unsure about any aspect of your project. There are numerous resources available online, from video tutorials to forums where you can ask questions and get advice from seasoned DIY enthusiasts and professionals.

Take Your Time

Patience is a virtue in DIY projects. Taking your time to measure accurately, cut precisely, and screw securely will pay off in the end. Rushing through the process can lead to mistakes that could compromise the quality and safety of your project.

Wrapping It All Up!!!

Creating a DIY recliner riser platform can be a rewarding project that enhances the comfort and accessibility of your recliner chair. Not only does it save you money, but it also allows for customization based on your specific needs.

Follow this expert-guided tutorial and enjoy the newfound comfort and ease in your living room. Always remember to prioritize safety during the construction and use of your new recliner riser platform. Happy DIY-ing!

Frequently Asked Questions:

What type of wood is best for a DIY Recliner Riser Platform?

The best type of wood for a DIY Recliner Riser Platform is a sturdy wood such as oak. While pine can also be used, it’s a softer wood and might not offer the same durability as oak. These types of wood can handle the weight of a recliner and the person using it. However, the choice of wood can also depend on your personal preference and the decor of your room. Ensure the wood is properly treated and sealed to prevent damage over time.

How can I ensure my DIY Recliner Riser Platform is safe and stable?

Safety and stability are paramount in building a DIY Recliner Riser Platform. First, ensure the measurements of the platform are slightly larger than the base of your recliner to provide stability. Second, use high-quality, sturdy materials and ensure all screws are secured tightly. Lastly, adding non-slip pads or rubber feet to the bottom of the platform will prevent it from sliding on your floor, adding an extra layer of safety.

Can I customize my DIY Recliner Riser Platform to match my decor?

Absolutely! One of the benefits of a DIY project is the ability to customize it to your liking. You can paint or stain the wood to match your existing furniture or decor. Alternatively, you could also use a wood that naturally matches your room’s aesthetic.

What tools will I need to build my own DIY Recliner Riser Platform?

The essential tools for this project include a saw for cutting the wood, a power drill for securing screws, and sandpaper for smoothing out any rough edges. If you decide to paint or stain your platform, you’ll also need paintbrushes or a roller.

How can I maintain my DIY Recliner Riser Platform for long-term use?

Maintaining your DIY Recliner Riser Platform involves regular inspections for any loose screws or damage and tightening or repairing as necessary. If you’ve painted or stained your platform, it may need a fresh coat over time to keep it looking its best. Cleaning the platform regularly to remove dust and spills will also help preserve its condition.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *