One Side Of Power Recliner Not Working – (Causes & Fixes)

There’s nothing quite as frustrating as settling into your plush power recliner, ready to relax, only to discover that one side of power recliner not working

Your comfort oasis just turned into a source of irritation. But don’t worry; we’ve got you covered. 

If you find that one side of your power recliner is not working, your primary suspects should be the power supply, internal wiring, or the motor. Take time to inspect these components and consider remote control troubleshooting or even professional repair as needed.

One Side of Power Recliner Not Working- A Brief Overview

Ah, the sheer annoyance of discovering that one side of your power recliner isn’t moving! You’ve got your favorite movie on, a snack by your side, and then—disaster. The comfort of your recliner is compromised, but don’t lose hope just yet. Before you consider dragging your recliner to the repair shop or, worse, think about a replacement, remember that the issue is often fixable at home. With a keen eye, you can examine the power supply, inspect the motor, and even check out the remote for possible issues. And hey, if all else fails, there’s always the option of calling in the professionals to get your relaxation haven back up and running.

Causes Why One Side of Power Recliner Not Working

Picture this: You’ve settled into your power recliner with a bowl of popcorn and the remote, ready to dive into a movie marathon. 

But alas, one side of the recliner won’t move. What do you do? You might be tempted to immediately assume the worst—motor failure, costly repairs, or a complete replacement. 

But hold on! The issue could be something quite simple and easily fixable. This section aims to provide a comprehensive diagnostic checklist that goes beyond the basic advice you might find elsewhere.

Check the Power Supply and Wiring

The first and most obvious step is to check whether the recliner is receiving power. Start with the basics: Is the power cable properly plugged into an outlet? 

If you’re using an extension cord, ensure it’s capable of handling the recliner’s power needs.

How to Identify Wiring Issues

Even if the recliner is plugged in, internal wiring issues could be the cause. Frayed wires, disconnected plugs, or visible damages could interfere with the electrical connectivity. 

Inspect all wires carefully to identify any that may look compromised. If you find any issues, this is likely your culprit.

Inspecting the Motor

Let’s say the power supply checks out. The next logical step is to focus on the motor, a common source of problems when one side of a power recliner is not working.

Motor Testing Techniques

Testing a motor might seem daunting, but there are simple ways to do it. You could either manually operate the motor for testing or use a multimeter to check its status. 

A failing motor will exhibit inconsistencies in operation or may not work at all. If the motor fails these tests, a replacement might be necessary.

Remote Control Troubleshooting

Many people overlook the remote control, but it’s often the simplest component to fix.

Tips for Remote Maintenance

Cleaning the internal circuitry and checking for signs of damage like corrosion or loose connections are easy ways to ensure your remote is in top shape. If these areas look good, then the remote likely isn’t the issue.

Manual Overrides and Resets

Some power recliners come with built-in manual overrides or reset buttons. These features can be quite helpful for tackling minor glitches.

When to Use the Manual Override

Use the manual override when the recliner isn’t responding to the remote or if you’ve detected minor glitches. Consult the user manual for instructions on how to activate the manual override. Often, this will solve the issue immediately.

Seek Professional Repair

If you’ve run through all the checks and the problem persists, it might be time to call in the experts.

Costs and Benefits of Professional Repair

A professional repair may seem costly, but it can be a worthwhile investment. Expect to spend anywhere from $100 to $300, depending on the issue. The benefits? You can expect a thorough repair, which often comes with a warranty.

Overcoming the Issues of One Side of the Power Recliner Not Working

The dilemma of having one side of a power recliner not working can be frustrating, to say the least. But there’s good news! Most issues can be diagnosed and fixed with a little bit of effort and a systematic approach. Here’s how you can overcome these issues:

1. Start with the Basics: Power Supply and Wiring

The first place to look when one side of your power recliner isn’t working is the power supply. Make sure that the chair is properly plugged into a working electrical outlet. You can also try plugging it into a different outlet to rule out the possibility of a faulty outlet.

Actionable Steps:

  • Check if the power cord is securely plugged into an electrical outlet.
  • Try using a different electrical outlet to ensure the issue is not with the power supply.

2. Inspect the Wiring

If the power supply isn’t the issue, the next step is to inspect the wiring. Look for any frayed wires, disconnected plugs, or other visible damages that might affect electrical connectivity.

Actionable Steps:

  • Inspect all visible wiring for fraying or disconnection.
  • Tighten any loose connections you may find.

3. Check the Motor

Motors can fail for a variety of reasons, from wear and tear to electrical issues. To diagnose a faulty motor, you may need to remove the covering of the recliner to inspect it.

Actionable Steps:

  • Carefully remove any covering to expose the motor.
  • Try operating the motor manually to see if it moves.

4. Perform Motor Testing

A more advanced step in diagnosing a faulty motor is to use a multimeter to check its status. This will give you an accurate idea of whether the motor is receiving power and functioning as it should.

Actionable Steps:

  • Use a multimeter to test the electrical current running to the motor.
  • Compare the readings to the standard operational guidelines found in your recliner’s manual.

5. Remote Control Troubleshooting

A faulty remote control can often mimic problems that appear to be motor or wiring issues. Make sure to check the remote control batteries and inspect it for any signs of damage.

Actionable Steps:

  • Replace the remote control batteries.
  • Check for any visible damages, such as corroded battery compartments.

6. Utilize Manual Overrides and Resets

Many power recliners come equipped with manual overrides or reset functions that can sometimes resolve minor issues immediately.

Actionable Steps:

  • Locate the manual override button or lever, usually found at the bottom of the recliner.
  • Activate the manual override to see if this corrects the issue.

7. Consult Professional Repair Services

If you’ve attempted all the troubleshooting steps and still face issues, the last resort is to consult a professional repair service. They can offer a more in-depth diagnosis and are equipped to fix intricate issues.

Actionable Steps:

  • Research and find a well-reviewed professional repair service.
  • Contact them for an evaluation and quote.


Navigating the frustrations of a malfunctioning power recliner can feel overwhelming, especially when one side isn’t functioning properly. 

But as we’ve outlined, the issue is often simpler than it appears. Whether you’re dealing with wiring issues, a failing motor, or a temperamental remote control, a systematic diagnostic approach can often resolve the problem.

If all else fails, professional repair services are available to restore your recliner to its original glory. 

So breathe easy; help is at hand to return your power recliner—and your relaxation—to full working order.


What is the most common reason one side of a power recliner stops working?

The most common culprit is usually a malfunctioning motor, followed closely by wiring issues. Check the motor’s operation with a multimeter and inspect wiring connections for frayed or disconnected cables.

Can a faulty remote control affect only one side of a power recliner?

Yes, a faulty remote can selectively affect one side of your recliner, especially if it has individual controls for each side. Check the remote’s batteries and internal circuitry for signs of wear or damage.

Is it possible for a software glitch to cause one side of a power recliner to malfunction?

Yes software glitches can cause asymmetrical issues in modern power recliners equipped with digital controls. Make sure your recliner’s software is up to date to resolve such inconsistencies.

When should I consider seeking professional repair if one side of my power recliner isn’t working?

Opt for professional help when you’ve ruled out simple fixes like power supply, remote issues, and manual overrides. A trained technician can offer advanced diagnostics and warranted repairs.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *